Welcome back to our building session! This time, we're going to be covering how to properly put stickers on the kit! You will go far with a set off tweezers on your side! We recommend that your tweezers have a point to them as that will help with getting the sticker off of the sheet. Carefully drive the sharp point under the sticker and clamp it down. This part is optional, but transfer the sticker to a toothpick. What this does is that it holds the sticker in place without it clinging onto the metal surface of tweezers. Slowly place one side of the sticker to the desired area. In the case shown in the pictures, make sure it is flush to the edge. Then, slowly press down on the sticker once it's in the desired position. It's a slow process, but the end results speak for themselves! Got any tips for making this process a bit easier? Post on the comments below! #gunpla #gundamseed #gundam