DevOps @modivo_sa, owner of local journal @kochamwielun With some Magic Lantern @autoexec_bin in spare time. Former Solution architect / SCM engineer @nokia.
Poland
Joined September 2011
- Tweets245
- Following16
- Followers221
- Likes108
New blog post. Bypassing disabled 6GHz WiFi frequencies in Dell Precision 5570 / XPS 9530 via a simple ACPI table patch (Linux only)
blog.kitor.eu/enable-wifi-6e…
I made 3d printable model for Nikon F to Canon RF adaptor.
That Nikkor 50/1.2 AI-s is pretty fun lens btw :)
printables.com/model/1477377…
Kajetan Krykwiński retweeted
How did the Midsummer release go? What else are we working on? What to expect in the future?
Read our first entry in Magic Lantern: What's next?
magiclantern.fm/forum/index.…
DIGIC 8, after stacked (package on a package) RAM was removed.
Good luck googling CH4-7000 P/N.
No cameras were harmed during chip removal. That SX70 HS was already dead by water submersion.
@autoexec_bin
Kajetan Krykwiński retweeted
So we have JTAG access on Digic 8 models now!
This should open new possibilities to understand how hardware and software inner workings :)
magiclantern.fm/forum/index.…
Info : JTAG tap: digic8.cpu_a9 tap/device found: 0x4ba00477 (mfg: 0x23b (ARM Ltd), part: 0xba00, ver: 0x4)
Info : digic8.cpu_a9: hardware has 6 breakpoints, 4 watchpoints
TIL: GBA TFT screen replacements use LCD from... EOS M2
(skip to ~12:50)
youtube.com/watch?v=Q3DdKJId…
Kajetan Krykwiński retweeted
What do we have here? 😃
magiclantern.fm/forum/index.…
LET'S GO!
It is happening!
After over 5 years we are returning with new builds of Magic Lantern. Including 4 new cameras and some exciting plans for the future!
Read more in our announcement forum post.
magiclantern.fm/forum/index.…
Time for something not camera related. My favourite stacking toolbox system - Qbrick Pro - had nothing that could fit my plunge saw. So with just a little help of 3d printing I made one out of two existing boxes. #qbrick #DIY
printables.com/model/1208155…
Kajetan Krykwiński retweeted
While we went silent for the most of 2024, we were busy working on "boring", mostly technical stuff. However we have some end-of-the-year news for you, including pretty exciting announcements for 2025 📷
magiclantern.fm/forum/index.…
This time something different. My journey of unbricking Lenovo ThinkSmart Camera after a failed firmware update. And a small rant on whoever designed firmware update process for those.
#Lenovo #ThinkSmart #Unbricking
blog.kitor.eu/lenovo-thinksm…
PowerShot SX740 HS recording 14 bit RAW. That's probably as low as it gets.
magiclantern.fm/forum/index.…
#magiclantern @autoexec_bin
Ah, and as a reminder - out of the box SX740 doesn't even do .CR3 RAW stills, it is jpeg only point-and-shoot. CR3 functionality is still in firmware, very buggy but can be enabled.
magiclantern.fm/forum/index.…
Got a faster card (Adata 64GB, ~290/260 r/w on UHSII reader). In cam benchmarks peak at ~220MB/s write.
3072x1728px was (almost) sustainable at 25fps. This is probably the limit of what uncompressed 14 bit RAW can do on this cam.
@autoexec_bin #eosr #magiclantern
📷
I thought there was a bug. But PEBKAC, I just used slow card. This is R recording 1080p30 14bit RAW, continuous :) (with ~100MB/s write card)
As always, this is PoC, unstable/unusable - only code available for now.
#magiclantern #eosr @autoexec_bin
youtube.com/watch?v=BOX8B_id…
Kajetan Krykwiński retweeted
A very RAW update!
magiclantern.fm/forum/index.…
