@solderparty

We design easy to use products that help you develop your projects. All our products are open source HW and SW! Find our links at https://xitter.cf/t.co/KquE5HDl7b

 Malmö, Sweden
linktr.ee/solderparty
Joined May 2020
  • Tweets1.1K
  • Following16
  • Followers6.6K
188Media
The wait is finally over! 🎉 The RP2350 Stamp, the RP2350 Stamp XL, and the RP2xxx Stamp Carrier XL are now available for purchase from our @lectronz store! Link in the reply below
A set of three PCBs, one is a small rectangular one, the RP2350 Stamp, and another is a bit larger, the RP2350 Stamp XL. The last one is a Due/Mega form-factor and footprints for the Stamps to be installed. It also contains a large amount of various connectors, including USB Host and Device, microSD, HDMI-shaped one, Qwiic, LiPo, DC Jack.

ALT A set of three PCBs, one is a small rectangular one, the RP2350 Stamp, and another is a bit larger, the RP2350 Stamp XL. The last one is a Due/Mega form-factor and footprints for the Stamps to be installed. It also contains a large amount of various connectors, including USB Host and Device, microSD, HDMI-shaped one, Qwiic, LiPo, DC Jack.

6
34
3
188
17,003
Solder Party retweeted
mozzwald@mozzwald22 Nov 2025
You can add a silicone keypad to anything now. Finally, someone has made this possible. Thank you @solderparty lectronz.com/products/keebde…

KeebDeck Keyboard

A compact silicone keyboard for your handheld project

lectronz.com
1
1
8
663
Now in stock on Lectronz: RP2350 Stamp XL lectronz.com/products/rp2350… by @solderparty #RaspberryPi #Prototyping #Application

RP2350 Stamp XL

Hand-solderable SMD/TH module w/ RP2350B(A4) MCU+16MB FLASH, LDO, LiPo charger, reset and boot btns. Breaks out all GPIO+USB+SWD+BOOTSEL+RST

lectronz.com
1
3
450
New on Lectronz: KeebDeck Keyboard lectronz.com/products/keebde… by @solderparty #Retrocomputing #Components #Prototyping

KeebDeck Keyboard

A compact silicone keyboard for your handheld project

lectronz.com
5
25
2,012
New on Lectronz: KeebDeck Basic lectronz.com/products/keebde… by @solderparty #USB #Retrocomputing #Prototyping

KeebDeck Basic

An affordable handheld QWERTY USB keyboard with a silicone keypad.

lectronz.com
3
7
2
38
3,161
We now have a single, easy-to-remember URL for everything Solder Party! links.solder.party

Links

Solder Party Links

links.solder.party
1
1
2
1,015
We have previously used linktr.ee for this, but it was a bit limiting. The new solution is implemented just like the rest of our website - using @GoHugoIO, and gives us lots of flexibility! You can check out the source here: github.com/solderparty/www/b…
290
If you're curious about the keyboard used in the #why2025 badge or in the Tanmatsu, you can learn more about it and our other projects here: keebdeck.com/

KeebDeck

The KeebDeck Keyboard is a compact (85x48mm) 69-key alphanumeric silicone keypad with an orthogonal layout based on standard PC keyboards. It has all the keys a hacker would expect and a few extra...

solder.party
2
1
5
3,928
Now in stock on Lectronz: FlexyPins - Pack of 100 lectronz.com/products/flexyp… by @solderparty #Components #Prototyping #TestEquipment

FlexyPins - Pack of 100

FlexyPin allows for easy insertion and removal of modules with castellated edges without the need for soldering!

lectronz.com
1
1
651
Solder Party retweeted
Hackster.io@Hacksterio25 Mar 2025
.@SolderParty launches a cut-down Stamp Carrier Basic for its RP2040 and RP2350 Stamp and Stamp XL. hackster.io/news/solder-part…

Solder Party Launches a Cut-Down Stamp Carrier Basic for Its RP2040, RP2350 Stamp and Stamp XL

If you only need the very barest of features from a Stamp breakout board, the new RP2xxx Stamp Carrier Basic is for you.

hackster.io
6
30
2,515
New on Lectronz: 3.7V/4.2V LiPo Charger with USB Type-C Plug lectronz.com/products/-37v42… by @solderparty #PowerManagement #Power

3.7V/4.2V LiPo Charger with USB Type-C Plug

A small 3.7V/4.2V LiPo Charger with a USB Type-C Plug, no cables needed!

lectronz.com
1
4
760
New on Lectronz: CP2102 USB to Serial/UART with USB Type-C Plug lectronz.com/products/cp2102… by @solderparty #USB #Prototyping

CP2102 USB to Serial/UART with USB Type-C Plug

A small breakout board for the CP2102 USB to Serial/UART Bridge with USB Type-C Plug!

lectronz.com
1
6
644
New on Lectronz: USB Type-C Plug Breakout - USB 3.0 Only lectronz.com/products/usb-ty… by @solderparty #USB #Components #Prototyping

USB Type-C Plug Breakout - USB 3.0 Only

A breadboard-compatible USB Type-C Plug breakout board, only breaks out the USB 3.0 pins.

lectronz.com
1
6
559
New on Lectronz: USB Type-C Plug Breakout - USB 2.0 Only lectronz.com/products/usb-ty… by @solderparty #USB #Components #Prototyping

USB Type-C Plug Breakout - USB 2.0 Only

A breadboard-compatible USB Type-C Plug breakout board, only breaks out the USB 2.0 pins.

lectronz.com
1
4
521
New on Lectronz: Raspberry Pi RM2 FlexyPin Adapter lectronz.com/products/raspbe… by @solderparty #RaspberryPi #WiFi #TestEquipment

Raspberry Pi RM2 FlexyPin Adapter

A breadboard adapter for the Raspberry Pi RM2 module using FlexyPins, no module soldering needed!

lectronz.com
1
5
481
New on Lectronz: RP2xxx Stamp Carrier Basic lectronz.com/products/rp2xxx… by @solderparty #RaspberryPi #Prototyping #Application

RP2xxx Stamp Carrier Basic

A very simple reference design supporting all the RP2-based Stamp boards. It breaks out all the pins of the Stamp.

lectronz.com
1
4
445
With the new @raspberrypi Pico SDK release, the RP2040 is certified to run at 200MHz. If you're looking for an easy way to integrate the RP2040 into your designs, our RP2040 Stamp makes it a breeze!
1
1
5
1,306
You can get it from our Tindie (tindie.com/products/arturo18…) and Lectronz (lectronz.com/products/rp2040…) stores.

RP2040 Stamp by Solder Party on Tindie

A hand-solderable SMD/TH module w/ RP2040 MCU+8MB FLASH, LDO, LiPo charger, reset btn, and Neopixel. Breaks out all GPIO+USB+SWD+BOOTSEL+RST

tindie.com
3
8
1,325
Earlier this month, we visited #FOSDEM and showed off some of our upcoming products ⌨️ See anything you like?
A table with the 10x version of the RP2350 Stamp on it, under it there's the real RP2350 Stamp, Stamp XL, and the Stamp Carrier XL. There is also a photo frame with some information about the company and a QR code to the linktr.ee. There are also multiple devices with a handheld qwerty keyboard. One with trackpad, one without. One with screen and antenna. One with just a large screen. And in the back there seems to be a premium device with a large screen, keyboard, and a case. Connected to a power bank.

ALT A table with the 10x version of the RP2350 Stamp on it, under it there's the real RP2350 Stamp, Stamp XL, and the Stamp Carrier XL. There is also a photo frame with some information about the company and a QR code to the linktr.ee. There are also multiple devices with a handheld qwerty keyboard. One with trackpad, one without. One with screen and antenna. One with just a large screen. And in the back there seems to be a premium device with a large screen, keyboard, and a case. Connected to a power bank.

8
2
13
1,517
Make sure to subscribe to our newsletter to get notified as soon as they become available: solderparty.substack.com/
1
382
Solder Party retweeted
Dreg@therealdreg24 Jan 2025
My adapter for RP2350 STAMP XL BOARD by @arturo182 "E9 bug-friendly" 16MB of FLASH 500mA 3.3V LDO All 48 GPIOs broken out QSPI PSRAM 64Mb APS6404L-3SQR-SN LiPo supply and charging circuit (with charging LED) USB Male A SWD + UART connector Reset Button Bootsel Button
2
12
1,759
Load more