I’m worried that the baby thinks people can’t change.

Joined June 2010
VGP Giveaway Time! Glitch is giving away a Nintendo Switch Metroid Dread Special Edition + her sticker to one lucky winner. RT, Like and Follow VGP to enter for a chance to win! Winner announced Friday, September 30th!
512
6,269
47
7,105
199,888
Replying to @BlitWorks
@BlitWorks sending this to you folks as well. On Slipstream PS5 (physical version) many of the radio songs don’t work. Clicking on them just results in silence.
1
63
I can confirm this is an issue with the latest patch on PS5 (2.001). On the version included on disc (2.000) music works just fine. Hopefully a fix can be rolled out soon!
53
Replying to @dorksince93
@dorksince93 hey Andy! I see you wrote up the review for the Philips 20PS47S301. Did you have any s vid issues with your set? Reflowed solder on mine, replaced the two caps near composite (and wildly enough, a pad lifted as I was snipping a leg) and it’s given me several results.
1
1
82
Seems to be a different result each time I plug in the cable. Composite is fine though.
1
51
Ugh, I just found the the solution and I feel real dumb. The port is pretty tight and I didn’t seat the cable in all the way. 🙃
42
Replying to @kurohouou
@kurohouou hey there! Your RT4K are amazing and so easy to use — thanks! I had a quick question. I assumed that AG Coarse represents something approximating a KV-27S42, but what do the different Slot masks represent? Would coarse represent something akin to a Toshiba A series?
2
94
I assume medium and dense would be more representative of PVMs and monitors.
60
Went through two damaged copies of Trails via Amazon before I remembered I should just buy from @VideoGamesPlus_. I don’t always buy new full priced games, but VGP is going to be my primary source if I can’t find them in store.
1
7
6,488
Quick tip for LG Oled @retrotink2 4K users: if you’re going the HDR + BFI + filter mask look, don’t forget to enable Dynamic Tone Mapping. It helps with dim screens *a lot.*
2
224
My @retrotink2 4K came in today. I wasn’t sure how much better it would look vs the 5X but the answer is… a lot, especially if you’re into crt sim. But my fave new feature is hdmi in, which allows me to throw my analogue systems and AVS at it. Major upgrade vs basic scanlines.
2
6
1,495
Replying to @retrotink2
@retrotink2 have you heard any reports of issues getting a clear picture with a tg16 plus spark plug on the 5X? I know mine worked without issue when I first got it but years later it can’t maintain a solid image.
1
113
In the H sampling screen it keeps swapping back and forth. This is on default profile. Also worth noting ps1 works great using same cable.
75
Replying to @6tanks1
@6tanks1 hey again! I picked up a Maganavox CD130MW9 over the weekend and saw you just added an entry on it. By any chance did you ever figure out if a Logitech Harmony remote can adjust picture? I see you note most remotes don’t have the right buttons. My 550s profile either.
3
107
Would really prefer not to have to source/pay for an original remote if possible. 🙃
1
67
Replying to @krikzz
@krikzz hey there! Could you check Ys III - Wanderer’s from YS (USA) to see if it’s working correctly? On my X5 the opening screen messes up and saves are all borked. Rom pulled from my 5+ year old no intro set. Original cart works fine.
1
84
Tested with a rom from a 2023 dump. Still has issues. Cuts off the Sammy screen and saves are messed up. Using an snes mini with rgb mod.
1
88
Looks like it cuts the start screen entirely and dumps you straight into the game.
67
Replying to @6tanks1
@6tanks1 hey Matt, I wanted to pick your brain real quick about the KV-27S42. I have one unmodded and tried your suggesting ghosting fix via S-Video. Unfortunately no change. Is that fix limited to RGB only?
2
91
Second, do you have any issues with faint hum bars in the lower left of the screen? Only really noticeable on solid colors. I talked to someone else who’s modded several and he said it’s been present on every on he’s seen but only seems to affect the 27” models.
2
87
FWIW, C541 seems to be a trouble cap on the board. I’ve seen several people say they need to replace theirs, including myself. C1751 was also bad for me and is on the 200V line.
65
Replying to @Voultar
@Voultar @RetroRGB hey guys, have you ever seen this sort of white blocky graphical issue before? Looks like it only happens on snes mini’s. Tested it across several modded and unmodded 1CHIP/minis/2 chip and it’s only present on minis regardless of tv or input.
1
75
I’m used to weird graphical issues on 1chips but I’ve never seen something that specifically only affects the mini. Of course, this also seems specific to Earthbound. 🤷
34
Hey @joshfairhurst, wasn’t Hime supposed to get a digital release in browsers a couple months ago? I’m interested in the physical but I didn’t want to commit until I get a feel for the game — don’t want to spend $45 on a 1 minute trailer.
49
Snes 1CHIP with @Voultar’s SNESRGB board and ghosting fix running through @retrotink2’s 5X to a 55” LG Oled (HDR enabled). If you’d have asked me a couple years back, I would said Super NT all the way, but in 2022 this combo is the clear winner.
4
3
1
87
3 years after release, @specialreserves physical release of Gato Roboto is not #completeoncart. A patch, weighing in at 446MB(!) was rolled out in July that fixes a game breaking bug and was not included in this release. A $30, incomplete version of an $8 game. Lame.
2
It’s wild to me how good @retrotink2’s 5X makes retro games look. Very comparable to a small CRT I just picked up today. This is a stock, not 1CHIP snes, running in Tru Motion HDR on a LG E8 OlED. Forgive the glare.
6
3
23
For anyone interested, these are my filter settings for 240p games. Not too heavy on the scanlines, just a smidge of blur to mix it all together.
3