REMORPH DESIGN 3D PRINTER RELEASED
xitter.cf/lexreman/status/194228…
An open source, industrial-grade filament 3D printer.
I wanted something serious. A machine that could age well and be buildable just about anywhere.
So I went through most open-source printer designs and a bunch of commercial ones I liked.
Picked what made sense to me and built something to my taste.
A lot of early decisions came from an easy-to-source mindset.
Extrusions had to be in 50 mm increments and use simple joints to avoid the need for cutting or drilling.
Metal parts had to be machinable by most workshops.
Double duty for some parts to serve as alignment tools during assembly.
…The whole project is shaped by goals like that.
It had to fit most workbenches and desks.
The extrusion logic, toolhead goals, electronics layout, and nozzle wiper, determined the XY range.
Printable area ended up at 307×307 mm.
Slightly larger build plate is due to some niche reasons, mainly, not printing on the very edges, heat around when the entire area is utilized and embedded sections to grab the flexible sheet.
For the XY I went with NEMA 23 servos.
To not constrain the size and weight of the toolhead components and to maintain comfortable chamber access, bigger motors made more sense than just adding more.
But N23 steppers cap out around 1000 RPM, so servos was the logical choice.
Z is driven by three NEMA 17s on belts. I like ballscrews, but sourcing good C7s is surprisingly hard.
Some might see the belt tensioners as overkill, I went through several iterations to make sure the adjust screws are easy to reach, without removing panels or getting into awkward positions.
For the toolhead, I wanted components to be independent.
To be able to take off the hotend or such, without touching anything else.
The PCB is front-mounted, close to the filament tube, which makes the umbilical cleaner and gives great access to connectors.
Filament is stored in a sealed box, using rope typically for vacuum tables. Desiccant compartments, and the spool sits on bearings to minimize resistance for the extruder.
There’s also a Y-splitter to feed filament externally.
At the top of the chamber, there is a slide-out filter box, three 15×40×80 mm HEPA filters and 0.69 L of activated carbon pellets.
Both chamber fan and part cooling fan draw air through it. The chamber fan exhaust splits into two outlets at the bottom to create a top-down convection.
The whole printer is sealed. Not airtight, but enough to maintain chamber temperatures better than most.
Dedicated parts for the small/particular gaps.
…Chamber connectors with slide-up covers.
Indirect lighting.
Optical endstops.
One fan per job, total of 4: hotend, part cooling, chamber, and electronics. For noise reasons.
Internal hinges.
Concealed door handle.
Recessed section for connectors at the back...
there is so much I would like to write about, I’ll share more about the interesting stuff eventually.
lexreman retweeted
gave studio an old sheet metal drawing with no thickness on it.
it figured out the thickness (.051) from the shape, built the folded part, and the flat pattern matched the original within .0006"
then it checked the part fits with the rest of the assembly
lexreman retweeted
ce destin résume toute la maladie de notre époque: avoir le discernement pour repérer l’actif du siècle dès le premier jour mais n’avoir ni la discipline ni le calme intérieur pour simplement attendre que le temps fasse son travail
SBF voulait accélérer l’histoire en trichant sur des paris crypto court-termistes à effet de levier alors qu’il possédait déjà un ticket qui allait se multiplier par 100 tout seul en 4 ans
parfois le plus grand ennemi d’un homme n’est pas le manque de talent mais son incapacité à rester assis tranquille sur une bonne décision
lexreman retweeted
Hermes Agent Radio just got a much-needed overhaul!!
- 24/7 AI-hosted radio
- AI news, deep dives & repo roasts
- Commit wrap ups, Hermes Feature walkthrough
- Community music, requests & weekly charts
- Submit songs, topics & questions
What do you think?!
@NousResearch
Catch it on:
hermesagentradio.com/listen
lexreman retweeted
Researchers have used reinforcement learning to teach a 5-tonne John Deere skid-steer loader to perform complex acrobatic manoeuvres autonomously. Trained in simulation and transferred to a real machine, the system can balance on two wheels, navigate rough terrain, spin, and control its bucket before landing safely.
The research demonstrates the potential of AI-driven automation for heavy construction and industrial machinery.
Video Credit: @leggedrobotics / @ETH
Paper: wevlv.co/4kltYys
#engineering #technology
lexreman retweeted
gpt-6.2 astra is the new SOTA for engineering and cad
it built this detailed iphone duo in @kinth_ai in 10 minutes
use it today: kinth.ai/pricing






















































