Join iDEAL Semiconductor’s Orion Kress-Sanfilippo at the All About Circuits Summit on October 14 for a look inside two converter evaluations: ⚡ A 65W USB-C quasi-resonant flyback ⚡ A 200W quarter-brick active-clamp flyback Register here: events.allaboutcircuits.com/…

In isolated DC-DC converters, switching and capacitive losses can matter just as much as conduction loss. Don’t let one datasheet number limit your next design. See why the best DC-DC designs start with SuperQ MOSFETs: idealsemi.com/isolated-dc-dc…

On Oct 14, iDEAL Semiconductor Co-Founder & CTO David Jauregui will deliver a keynote at the All About Circuits 2026 Summit exploring why long-held assumptions about silicon deserve another look. Register here: events.allaboutcircuits.com/…

The best DC-DC designs start with the right MOSFET. See why the best DC-DC designs start with SuperQ MOSFETs: idealsemi.com/how-to-improve…

What Is a Power Semiconductor? Logic chips want low voltage. The grid delivers high voltage. Power semiconductors make the two work together. Learn more about the role power semiconductors play in modern electronic systems. idealsemi.com/advantage-of-t…

Our latest application note explains why passive-active and active-passive transitions behave differently, and why optimizing each independently can improve switching performance. One dead time setting is convenient; two dead time settings may be better. idealsemi.com/wp-admin/admin…

Theory is useful. Measured data is better. Using a double-pulse test setup, we compared: • Traditional Qsw calculations • Proposed percent-point Qsw calculations • Actual measured switching energy The results were striking. Explore the methodology: idealsemi.com/wp-admin/admin…

Looking to reduce voltage overshoot? Our latest application note shows how dead time adjustment can dramatically improve switching waveforms. See the waveforms: idealsemi.com/wp-admin/admin…

We’re excited to share that iDEAL Semiconductor’s 200V SuperQ® MOSFET family has been nominated for Semiconductor Product of the Year in the Instrumentation & Electronics Awards! Vote for SuperQ: iandeawards.co.uk/vote #InstrumentationAndElectronicsAwards #iDEALSemiconductor

Our application note proposes a refined Qsw definition that uses the familiar 10% Ids and 10% Vds measurement points to better capture where switching energy actually occurs in modern RESURF devices. idealsemi.com/wp-admin/admin…

How do you know when dead time is optimized? Our latest application note shows a simple oscilloscope-based method to identify the optimal dead time by observing body diode conduction. Learn more: idealsemi.com/wp-admin/admin…

As device architectures evolve, should our measurement methods evolve too? As power converters become more efficient, accurate device models become increasingly important for applications ranging from data centers to drones. Learn more: idealsemi.com/wp-admin/admin…

Is Your Dead Time Too Long? Our latest application note shows how optimizing dead time can reduce overshoot, lower EMI, and improve efficiency in hard-switched power converters. Download the application note: idealsemi.com/wp-admin/admin…

What if your switching loss calculations are overestimating losses by more than 300%? Our latest application note explains why and introduces a refined method that better aligns with measured switching energy. Read the application note to learn why: idealsemi.com/wp-admin/admin…

What can SuperQ do? ⚡ In a high-power LLC converter, SuperQ MOSFETs achieved 98% peak efficiency with lower power loss, reduced thermal stress & high power density. Featured FETs: idealsemi.com/product/71387/ Ask an expert: idealsemi.com/ask-an-enginee…

What can SuperQ do? ⚡ In a 300W boost converter, SuperQ delivered up to 0.5% higher efficiency, 77% lower EOSS, 20% lower QSW & up to 7°C lower temperature rise. 150V FET: idealsemi.com/product/71387/ Ask an expert: idealsemi.com/ask-an-enginee…

Higher switching frequencies demand lower switching losses. ⚡ SuperQ’s low QSW delivers higher efficiency, lower heat & greater power density. 150V, 6.4mΩ FET: idealsemi.com/product/71387/ Ask an expert: idealsemi.com/ask-an-enginee…

In this 204W ¼ brick active clamp forward converter, SuperQ™ delivered: 0.8% higher efficiency, 31°C lower temperatures, Lower total power loss, Higher achievable power density. Featured FET: idealsemi.com/product/71387/ – 150V, 6.4mΩ ❓Ask a SuperQ Expert idealsemi.com/ask-an-enginee…

What can SuperQ™ do? In a 65W QR flyback with a GaN primary switch, SuperQ in the SR stage delivered up to 0.5% higher efficiency, 20°C cooler GaN temps, and lower losses. With 73% lower QSW, it enables faster switching. Learn more: ow.ly/KIFW50Z9TqL

What can SuperQ™ do? In a 20W flyback design, SuperQ MOSFETs delivered up to 1.8% higher efficiency and 6°C lower FET temps. As switching frequencies rise, thermal losses matter. Featured: iS15M8R8S1C (150V, 8.8mΩ). Ask an expert: idealsemi.com/ask-an-enginee…