@Julzcrypti
iAccount based inNigeria
About this account
- Account based in
- Nigeria
- Connected via
- Nigeria App Store
Account-level information from X, not a live location or the device used for a specific post.
Creator|| Host Space ||Living faith church Worldwide ||Manchester United fan♥️||Dm for promo
Joined October 2023
- Tweets53.6K
- Following1.7K
- Followers2K
- Likes97.8K
Pinned Tweet
gAxis everyone,
I just completed another task on @axisrobotics "𝗼𝗽𝗲𝗻 𝘁𝗵𝗲 𝗺𝗶𝗰𝗿𝗼𝘄𝗮𝘃𝗲 𝗮𝗻𝗱 𝗽𝘂𝘁 𝘁𝗵𝗲 𝘀𝘁𝗿𝗮𝘄𝗯𝗲𝗿𝗿𝘆 𝗶𝗻𝘀𝗶𝗱𝗲
Picking up the strawberry is usually easy.
The hard part is opening the microwave door the right way, then moving the robot arm inside without bumping the sides.
𝗠𝘆 𝗦𝘁𝗿𝘂𝗴𝗴𝗹𝗲𝘀 𝗧𝗿𝘆𝗶𝗻𝗴 𝗧𝗼 𝗖𝗼𝗺𝗽𝗹𝗲𝘁𝗲 𝗧𝗵𝗶𝘀 𝗧𝗮𝘀𝗸 :
I kept failing this microwave task because of the door not picking the strawberry.
→ The door only opened when my gripper was in the exact right spot.
→ The space inside is tight, so one small bump ruins it.
→ I also kept starting over instead of saving a checkpoint.
𝗧𝗵𝗶𝘀 𝗶𝘀 𝗵𝗼𝘄 𝗜 𝗳𝗶𝗻𝗮𝗹𝗹𝘆 𝗰𝗼𝗺𝗽𝗹𝗲𝘁𝗲𝗱 𝗶𝘁.
→ I stopped rushing and focused on the door first.
→ I moved the gripper to one exact spot on the handle.
Then I pressed N right away to save that position so I didn’t have to start over every time.
→ After that, I pressed D and the down arrow together that's when the door opened cleanly.
Then I followed a simple order:
→ Open the door.
→ Pick up the strawberry.
→ Put it inside.
I also learned to move slower, fast movements made the arm hit the microwave and ruined the attempt.
If I messed up after the door was open, I pressed B to go back to my checkpoint instead of doing the whole thing again.
This was how I was able to get a hand of this particular task and the steps are also applicable to other Microwave tasks.
~ @axisrobotics has opened pre registration for the $AXIS Community Sale.
The Community Sale details:
→ Price: $0.10 / $AXIS
→ FDV: $100M
→ Raise: $1M USDC
→ Network: Base
→ Allocation: $100 – $100,000 per entry
→ 10% unlocked at TGE
→ 6-month cliff
→ 90% linear vesting over the following 6 months
Check quoted Post for details.
Julz retweeted
Last Tuesday on All About Miden
Last Tuesday’s All About @0xMiden Space was a special one.
We had @zkGaylord , a Product Marketer at Miden
Alongside the @joinbread official account
Both shared insights into what users and builders can expect as Miden moves closer to mainnet.
We talked about the
- current testnet
- Bread
- the mainnet experience
- what people should be paying attention to as Miden gets closer to launch
One question I found particularly interesting was:
- What should people build on Miden?
Gaylord pointed towards areas like programmable payments and finance, DeFi projects and especially ideas that can take advantage of what makes Miden different from other chains.
- He also mentioned microfinance as an interesting area to explore.
The point wasn’t that builders have to focus only on finance.
Even something like games could be interesting, even if that’s not currently the main focus, especially if someone finds a way to use Miden’s unique capabilities in a way other chains can’t easily replicate.
That part stuck with me.
Because as mainnet gets closer, the question becomes less about what Miden can technically do and more about what people will actually build with it.
And from everything discussed on the Space, mainnet is shaping up to be an exciting phase for builders and users.
There’s a lot to look forward to.
Thanks again to Gaylord and the Bread team for joining us and taking the time to answer questions from the community.
And as always, thanks to everyone who joined All About Miden.
See you next Tuesday.
Happy new week
We go again
gAxis everyone,
Quick reminder on @axisrobotics
The creator campaign on kaito epoch 2 is live.
Duration: 19th September to 18th October.
Max content: 10 and best 6 will be selected.
Epoch 1 leaderboard TBA.
If you missed epoch 1 you can start here s.kaito.ai/zm3IddA
Check the quoted Post for more details.
gAxis everyone,
Quick reminder on @axisrobotics
The creator campaign on kaito epoch 2 is live.
Duration: 19th September to 18th October.
Max content: 10 and best 6 will be selected.
Epoch 1 leaderboard TBA.
If you missed epoch 1 you can start here s.kaito.ai/zm3IddA
Check the quoted Post for more details.
📢 Axis Creator Program Update
Epoch 1 is officially closed, and Epoch 2 is live (00:00 UTC, Sept 19).
Huge thanks to all creators who joined us and @KaitoAI for the incredible first epoch:
🔥 5,341 creators joined
🔗 250,429 total creator link clicks
📦 31,980 signed trajectories referred
Epoch 1 mindshare data is now being processed to finalize rankings (expected to take 1–2 weeks). The leaderboard will remain “TBA” during this period. Thank you for your patience.
Now, let's run it back in Epoch 2 🤖
Congratulations to me just hit 2M followers 🎉🥳
Thanks for loving me have a productive weekend.
gAxis everyone,
I just completed another task on @axisrobotics "𝗼𝗽𝗲𝗻 𝘁𝗵𝗲 𝗺𝗶𝗰𝗿𝗼𝘄𝗮𝘃𝗲 𝗮𝗻𝗱 𝗽𝘂𝘁 𝘁𝗵𝗲 𝘀𝘁𝗿𝗮𝘄𝗯𝗲𝗿𝗿𝘆 𝗶𝗻𝘀𝗶𝗱𝗲
Picking up the strawberry is usually easy.
The hard part is opening the microwave door the right way, then moving the robot arm inside without bumping the sides.
𝗠𝘆 𝗦𝘁𝗿𝘂𝗴𝗴𝗹𝗲𝘀 𝗧𝗿𝘆𝗶𝗻𝗴 𝗧𝗼 𝗖𝗼𝗺𝗽𝗹𝗲𝘁𝗲 𝗧𝗵𝗶𝘀 𝗧𝗮𝘀𝗸 :
I kept failing this microwave task because of the door not picking the strawberry.
→ The door only opened when my gripper was in the exact right spot.
→ The space inside is tight, so one small bump ruins it.
→ I also kept starting over instead of saving a checkpoint.
𝗧𝗵𝗶𝘀 𝗶𝘀 𝗵𝗼𝘄 𝗜 𝗳𝗶𝗻𝗮𝗹𝗹𝘆 𝗰𝗼𝗺𝗽𝗹𝗲𝘁𝗲𝗱 𝗶𝘁.
→ I stopped rushing and focused on the door first.
→ I moved the gripper to one exact spot on the handle.
Then I pressed N right away to save that position so I didn’t have to start over every time.
→ After that, I pressed D and the down arrow together that's when the door opened cleanly.
Then I followed a simple order:
→ Open the door.
→ Pick up the strawberry.
→ Put it inside.
I also learned to move slower, fast movements made the arm hit the microwave and ruined the attempt.
If I messed up after the door was open, I pressed B to go back to my checkpoint instead of doing the whole thing again.
This was how I was able to get a hand of this particular task and the steps are also applicable to other Microwave tasks.
Businesses still can’t go all in onchain because blockchains are too transparent.
Moving more of their operations onchain today means giving away information they simply can’t afford to expose.
In this episode of Privacy Podcast, @btschiller speaks with @Corpetty of @Logos_network about full-stack privacy, metadata leakage, and why protecting the transaction itself is not enough if the rest of the transaction lifecycle still leaks information.
Watch here 👇 youtube.com/watch?v=Zh0vblcc…
Julz retweeted
Replying to @sandeepnailwal
That’s why — it’s implicit
Asked a Swiss banker heading digital assets if their customers ask for privacy.
“No. But they bank with us.
They expect the highest form of privacy. It’s our responsibility to make sure they have it, no matter which asset or rail.”
Can you imagine explaining to your customer that the public could find out everything she’s investing in digital assets?
Julz retweeted
🚨 Axis NGN Community Space is happening tonight!
Join us as we connect, share updates, discuss what’s happening across the Axis ecosystem, and engage with the community.
📆: Friday, 18th Sept | 8pm WAT
🔗: nitter.cf/i/spaces/1MJgNbdVMvwGL
Set your reminder. 🔔
Good morning mutuals
We all touching grass today yeah?
Please support my quoted Post I will return the favor 🙏🏻
gAxis everyone,
I just completed another task on @axisrobotics "𝗼𝗽𝗲𝗻 𝘁𝗵𝗲 𝗺𝗶𝗰𝗿𝗼𝘄𝗮𝘃𝗲 𝗮𝗻𝗱 𝗽𝘂𝘁 𝘁𝗵𝗲 𝘀𝘁𝗿𝗮𝘄𝗯𝗲𝗿𝗿𝘆 𝗶𝗻𝘀𝗶𝗱𝗲
Picking up the strawberry is usually easy.
The hard part is opening the microwave door the right way, then moving the robot arm inside without bumping the sides.
𝗠𝘆 𝗦𝘁𝗿𝘂𝗴𝗴𝗹𝗲𝘀 𝗧𝗿𝘆𝗶𝗻𝗴 𝗧𝗼 𝗖𝗼𝗺𝗽𝗹𝗲𝘁𝗲 𝗧𝗵𝗶𝘀 𝗧𝗮𝘀𝗸 :
I kept failing this microwave task because of the door not picking the strawberry.
→ The door only opened when my gripper was in the exact right spot.
→ The space inside is tight, so one small bump ruins it.
→ I also kept starting over instead of saving a checkpoint.
𝗧𝗵𝗶𝘀 𝗶𝘀 𝗵𝗼𝘄 𝗜 𝗳𝗶𝗻𝗮𝗹𝗹𝘆 𝗰𝗼𝗺𝗽𝗹𝗲𝘁𝗲𝗱 𝗶𝘁.
→ I stopped rushing and focused on the door first.
→ I moved the gripper to one exact spot on the handle.
Then I pressed N right away to save that position so I didn’t have to start over every time.
→ After that, I pressed D and the down arrow together that's when the door opened cleanly.
Then I followed a simple order:
→ Open the door.
→ Pick up the strawberry.
→ Put it inside.
I also learned to move slower, fast movements made the arm hit the microwave and ruined the attempt.
If I messed up after the door was open, I pressed B to go back to my checkpoint instead of doing the whole thing again.
This was how I was able to get a hand of this particular task and the steps are also applicable to other Microwave tasks.
Julz retweeted
gAxis everyone,
I just completed another task on @axisrobotics "𝗼𝗽𝗲𝗻 𝘁𝗵𝗲 𝗺𝗶𝗰𝗿𝗼𝘄𝗮𝘃𝗲 𝗮𝗻𝗱 𝗽𝘂𝘁 𝘁𝗵𝗲 𝘀𝘁𝗿𝗮𝘄𝗯𝗲𝗿𝗿𝘆 𝗶𝗻𝘀𝗶𝗱𝗲
Picking up the strawberry is usually easy.
The hard part is opening the microwave door the right way, then moving the robot arm inside without bumping the sides.
𝗠𝘆 𝗦𝘁𝗿𝘂𝗴𝗴𝗹𝗲𝘀 𝗧𝗿𝘆𝗶𝗻𝗴 𝗧𝗼 𝗖𝗼𝗺𝗽𝗹𝗲𝘁𝗲 𝗧𝗵𝗶𝘀 𝗧𝗮𝘀𝗸 :
I kept failing this microwave task because of the door not picking the strawberry.
→ The door only opened when my gripper was in the exact right spot.
→ The space inside is tight, so one small bump ruins it.
→ I also kept starting over instead of saving a checkpoint.
𝗧𝗵𝗶𝘀 𝗶𝘀 𝗵𝗼𝘄 𝗜 𝗳𝗶𝗻𝗮𝗹𝗹𝘆 𝗰𝗼𝗺𝗽𝗹𝗲𝘁𝗲𝗱 𝗶𝘁.
→ I stopped rushing and focused on the door first.
→ I moved the gripper to one exact spot on the handle.
Then I pressed N right away to save that position so I didn’t have to start over every time.
→ After that, I pressed D and the down arrow together that's when the door opened cleanly.
Then I followed a simple order:
→ Open the door.
→ Pick up the strawberry.
→ Put it inside.
I also learned to move slower, fast movements made the arm hit the microwave and ruined the attempt.
If I messed up after the door was open, I pressed B to go back to my checkpoint instead of doing the whole thing again.
This was how I was able to get a hand of this particular task and the steps are also applicable to other Microwave tasks.
~ @axisrobotics has opened pre registration for the $AXIS Community Sale.
The Community Sale details:
→ Price: $0.10 / $AXIS
→ FDV: $100M
→ Raise: $1M USDC
→ Network: Base
→ Allocation: $100 – $100,000 per entry
→ 10% unlocked at TGE
→ 6-month cliff
→ 90% linear vesting over the following 6 months
Check quoted Post for details.
Julz retweeted
JOIN THE HUNT.
Apply now:
apply.bitfoots.xyz/
Julz retweeted
My social media guy requested me to do videos 🫡
If you like it I'll do more, and maybe @danielokey_ will give me a raise 👍
TLDR: @joinbread just launched, it was cool, more Bread-content coming soon 👀
Julz retweeted
Now your agent can use @arc controlled by rules you set
So grateful to have @catena_labs visit our developer Pre-Show yesterday.
@AndrewHungate and the team have built an exceptional product
Thank you again for being a part of our community
Now your AI agents can use @arc (+ other chains & rails), controlled by rules you set.
Here, our agent requests a $10/day budget, gets approved, and goes to work.
Early Access is now open for a limited time. Sign up, try Arc, and you could get up to $50 for your agent's feedback.