ALT Far left: Black USB-A male cable (standard Type-A plug). This is the side that plugs into a USB 3.x Type-A port on the server. White plastic piece in the middle: This is a USB adapter/coupler (most likely the USB-C-to-USB-A adapter that ships with the JCE145C version, or a compatible gender changer/extension). Left side of the white piece: USB-A female that the black cable is plugged into. Right side of the white piece: The mating connector for the short white pigtail from the j5create body. The small white latch/flap visible is the typical USB retention clip (or the housing of the adapter). It looks engaged but the joint has a slight gap/angle, which is common with these short pigtail + adapter combinations when the cable is under any tension. Short white cable: Integrated ~10 cm USB cable that is permanently attached to the j5create body. On the JCE145 / JCE145C this is a USB-C male; the white adapter converts it so it can plug into a regular USB-A port. Gray aluminum body: The j5cr